posted by on Aimpoint Scopes

No comments

Chinese receiver and several Springfield Armory, Inc. receivers.
Chinese receiver and several Springfield Armory, Inc. receivers. Chinese receiver and several Springfield Armory, Inc. receivers. It would not insert into the operating rod channel. The operating rod looks very good but I recommend having a M14 Scope Mounts gunsmith fit a TMI operating rod to your receiver. The Pictorial M14 Scope Mounts Magazine Identification [...]

Chinese receiver and several Springfield Armory, Inc. receivers.
Chinese receiver and several Springfield Armory, Inc. receivers. It would not insert into the operating rod channel. The operating rod looks very good but I recommend having a M14 Scope Mounts gunsmith fit a TMI operating rod to your receiver. The Pictorial M14 Scope Mounts Magazine Identification Guide remains free and available for unlimited distribution. I [...]

Stanag Scope Mount ARMS #21
Not the perfect solution. The Pmag is an improvement, since it has a curved lower section after the straight upper neck. It still has to work around the straight AR magwell, though, so it can never be perfect. Better solutions are similar to the [...]

Pistol Holsters
1/22/2012 2:36:36 PM Originally Posted By nolexforever: my P99 Blackhawk Holsters Holster does fit the PPQ but the PPQ does not withdraw as smoothly. the slide is slightly catching on something, but otherwise it fits. http://i11.photobucket.com/albums/a155/nolexforever/IMG_0326.jpg Where did you get the extensions? Walther USA has been giving me the run around. Friendly_Crusader

1/22/2012 2:36:36 PM Originally Posted By nolexforever: my P99 Blackhawk Holsters Holster does fit the PPQ but the PPQ does not withdraw as smoothly. the slide is slightly catching on something, but otherwise it fits. http://i11.photobucket.com/albums/a155/nolexforever/IMG_0326.jpg Where did you get the extensions? Walther USA has been giving me the run around. Friendly_Crusader

M14 Scope Mounts
M14 Scope Mounts – GeorgeCostanza [Member] 8/10/2010 10:10:34 PM Originally Posted By Milo5: I shall address that reply from the aptly named GeorgeCostanza,,, 1. I AM a better gunsmith than the average grunt, thank you for recognizing that fact. [...]

AR-15 Scopes
AR-15 Scopes 2/10/2011 5:03:08 PM I have the Burris tac30 in a larue mount. Going from a eotech to thisAR-15 scopewas easy for me since the reticles are similar in design. Zarboe Q: Which bayonet is supposed to go with Q: Which bayonet is supposed to go with Q: Which bayonet is supposed to go [...]

AR-15 Scopes
2/10/2011 5:03:08 PM I have the Burris tac30 in a larue mount. Going from a eotech to thisAR-15 scopewas easy for me since the reticles are similar in design. Zarboe

Q: Which bayonet is supposed to go with
Q: Which bayonet is supposed to go with Q: Which bayonet is supposed to go with the M14 Scope Mounts? A: The US M6 bayonet. It fits the US M8A1 sheath, like the M4, M5, and M7 bayonets. Websites: www.imageseek.com/M1A … Continue reading

Q: Which bayonet is supposed to go with
Q: Which bayonet is supposed to go with the M14 Scope Mounts? A: The US M6 bayonet. It fits the US M8A1 sheath, like the M4, M5, and M7 bayonets. Websites: www.imageseek.com/M1A Scope Mounts -Different’s M14 Scope Mounts Site www.fredsM14 Scope Mountsstocks.com -Fred’s M14 Scope Mounts Stocks [...]

Navistar Defense unveils military
Navistar Defense unveils military Lisley-based Navistar Defense, LLC, Indigen Armor and SAIC today unveiled the team’s Special Operations

Scope Rings 2/9/2008 11:45:23 PM Look here. Unfortunately
Scope Rings 2/9/2008 11:45:23 PM Look here. Unfortunately I have only been able to find them for their 1″ Scope Rings , not the 30mm. I am not sure if they make them for the 30mm, but it seems like … Continue reading

Larue Tactical
This is the unofficial version until someone says it’s great, bold the title and make it all official. Going to layout some ground rules first and then start adding the content. READ THESE RULES BEFORE READING ON OR POSTING!! 1. No Cherry Picking – This [...]

Tapco AR-15 T6 Stock Body: MSP Scope Mounts
Tapco AR-15 T6 Stock Body: MSP Scope MountsPrecision and Tactical Tapco AR-15 Accessories: Tapco AR-15 T6 Stock Body from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products … Defense & Military Conferences & Related Events … Continue reading

Mesa Tactical
Mesa Tactical – M14 Scope Mounts

Eotech
Eotech 12/8/2008 10:48:39 PM MegaHurts: What kind of a battery does an aimpoint use? From the looks of it a watch battery(I don’t actually know but I think I will try and look it up)? I just kinda like the fact that the batteries for the EOTech are cheap and easy to get. You’ll go [...]

Eotech
12/8/2008 10:48:39 PM MegaHurts: What kind of a battery does an aimpoint use? From the looks of it a watch battery(I don’t actually know but I think I will try and look it up)? I just kinda like the fact that the batteries for the EOTech are cheap and easy to get. You’ll go through [...]

12/8/2008 10:48:39 PM MegaHurts: What kind of a battery does an aimpoint use? From the looks of it a watch battery(I don’t actually know but I think I will try and look it up)? I just kinda like the fact that the batteries for the EOTech are cheap and easy to get. You’ll go through many more of them though fletchnuts

Mesa Tactical
Mesa Tactical Mesa Tactical Mesa Tactical – I still use the Mesa Tactical back pin as the larger fasteners it uses are superior to the Brownell’s back pin. General welding and fit and finish etc. kobren 1/3/2003 2:19:54 AM I have examples of both the Howa (2) and the Costa Mesa Tactical (1) AR180 and [...]

Mesa Tactical
Mesa Tactical Mesa Tactical – I still use the Mesa Tactical back pin as the larger fasteners it uses are superior to the Brownell’s back pin. General welding and fit and finish etc. kobren 1/3/2003 2:19:54 AM I have examples of both the Howa (2) and the Costa Mesa Tactical (1) AR180 and would have [...]

Mesa Tactical
Mesa Tactical – I still use the Mesa Tactical back pin as the larger fasteners it uses are superior to the Brownell’s back pin. General welding and fit and finish etc. kobren 1/3/2003 2:19:54 AM I have examples of both the Howa (2) and the Costa Mesa Tactical (1) AR180 and would have to give [...]

Mesa Tactical
I still use the Mesa Tactical back pin as the larger fasteners it uses are superior to the Brownell’s back pin. General welding and fit and finish etc. kobren 1/3/2003 2:19:54 AM I have examples of both the Howa (2) and the Costa Mesa Tactical (1) AR180 and would have to give a slight edge to the Howa on fit and finish. The lockup on the Howa folding stock is noticably better then the Costa Mesa Tactical and the handguards on the Howa seem a little tighter then the Costa Mesa Tactical. Also the lettering and numbers are stamped better then the Costa Mesa Tactical. The parkerized finish on both is very close with maybe a slight edge going to the Howa. Another item is the white lines on the rear sight. One item the Costa Mesa Tactical has which you won’t find on most of the Howas is the bayonet lug. In no way am I knocking the Costa Mesa Tactical AR180, the one I have runs like a Rolex and both rifles seem equal in this respect. Very well could be. But with that thread, it seems that quite a few people got one from “a bad batch” also. As for the screw softness info, before my father told me about it, I wouldn’t have even known! I thought it was more of an “out of spec” issue, or that it was the Benelli Reciever.

Mesa Tactical
Mesa Tactical

Mesa Tactical

Scope Mounts
2/11/2004 10:06:17 PM Originally Posted By C4iGrant: IM Sent… C4 Replied QUIB

2/11/2004 10:06:17 PM Originally Posted By C4iGrant: IM Sent… C4 Replied QUIB

Larue Tactical
Larue Tactical What are you talking about. Larue Tactical rifles are given to Mark from Jesus himself. Why would it matter if the CNC machines are on or not… oh your worried about the upcoming dillo panic buying! CNC stands for Christ and Company? Works for me. Can I get an amen from the congregation?! [...]

Larue Tactical
What are you talking about. Larue Tactical rifles are given to Mark from Jesus himself. Why would it matter if the CNC machines are on or not… oh your worried about the upcoming dillo panic buying! CNC stands for Christ and Company? Works for me. Can I get an amen from the congregation?! jevonniespapi 4/7/2012 [...]

What are you talking about. Larue Tactical rifles are given to Mark from Jesus himself. Why would it matter if the CNC machines are on or not… oh your worried about the upcoming dillo panic buying! CNC stands for Christ and Company? Works for me. Can I get an amen from the congregation?! jevonniespapi 4/7/2012 10:33:27 PM EDT Originally Posted By BCV: What are you talking about. Larue Tactical rifles are given to Mark from Jesus himself. Why would it matter if the CNC machines are on or not… oh your worried about the upcoming dillo panic buying! techbrute

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you [...]

Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.

Mesa Tactical
Mesa Tactical Mesa Tactical Mesa Tactical – Mesa Tactical Mesa Tactical – Mesa Tactical Stencils – MIL-SPEC MONKEY STOREOur CC security can be a bit strong at times, please use paypal or google checkout to pay if you run into issues (no special signup required). After an order is … Although FN did not get [...]

Mesa Tactical
Mesa Tactical Mesa Tactical – Mesa Tactical Mesa Tactical – Mesa Tactical Stencils – MIL-SPEC MONKEY STOREOur CC security can be a bit strong at times, please use paypal or google checkout to pay if you run into issues (no special signup required). After an order is … Although FN did not get the Garand replacement Although [...]

Ultimate Training Munitions Continues to Expand Its U.S. Distribution and Names Atlantic
As the Need for Reality-Based Training Increases, Leading Provider Partners With Venerable East Coast Public Safety Equipment Supplier NORTH BRANCH, NJ–(Marketwire – May 4, 2012) – Ultimate Training Munitions (UTM), a leading provider of weapon …

Mesa Tactica
Mesa Tactical – Homeland Security Articles & Border Security Information | IDGARead articles, listen to podcasts and watch videos about Homeland Security, Border Security and Disaster Relief. Received this from a Threeper I trust implicitly Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a [...]

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you [...]

Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
M14 Scope Mounts

Alleged auto burglars arrested in Milpitas
Alleged auto burglars arrested in MilpitasAccording to authorities, officers responded to a report of three suspects with Mesa Tactical Mesa Tactical – . To me it sounds like you are stuck on keeping the M14 Scope Mounts platform for the Army, only thing I am doing is disagreeing with that stance. I am aware there [...]

Alleged auto burglars arrested in Milpitas
According to authorities, officers responded to a report of three suspects with

Mesa Tactical
Mesa Tactical – . To me it sounds like you are stuck on keeping the M14 Scope Mounts platform for the Army, only thing I am doing is disagreeing with that stance. I am aware there exists lot of band-aids for the M14 Scope Mounts-EBR system, but every band aid you add, you create other [...]

Mesa Tactical

. To me it sounds like you are stuck on keeping the M14 Scope Mounts platform for the Army, only thing I am doing is disagreeing with that stance. I am aware there exists lot of band-aids for the M14 Scope Mounts-EBR system, but every band aid you add, you create other problems.

Ultra Electronics USSI is pleased to announce a partnership agreement with Bluecolt®
Ultra Electronics USSI is pleased to announce a partnership agreement with Bluecolt®

Q: Which bayonet is supposed to go with
ulton Armory M14 Scope Mounts SOCOM SemiAuto Sniper System (SASS) Stock System…. Does anyone have this system? What are the bitches and gripes about it? Functional for medium to long range shooting? http://www.fulton-armory.com/MAParts.htm#Parts What says the hive? USMC_JA [Member] 11/30/2010 3:55:17 PM I’m a big M14 Scope Mounts/M1A Scope Mounts [...]

M14 Scope Mounts
M14 Scope Mounts

Mesa Tactical
Mesa Tactical – Mesa Tactical

Mesa Tactical
Mesa Tactical

Harris Bipod Model 1A2-L 9″ to 13″ Solid Mount Black: MSP Scope Mounts
Harris Bipod Model 1A2-L 9″ to 13″ Solid Mount Black: MSP Scope MountsPrecision and Tactical : Harris Bipod Model 1A2-L 9 … Harris Bipod Model 1A2-L 9″ to 13″ Solid Mount Black. Versatile, sturdy, light and fast. Defense Review – MICOR Defense Leader 50 Ultra-Compact … Defense Review – MICOR Defense Leader 50 Ultra-Compact …MICOR [...]

Harris Bipod Model 1A2-L 9″ to 13″ Solid Mount Black: MSP Scope Mounts
Precision and Tactical : Harris Bipod Model 1A2-L 9 … Harris Bipod Model 1A2-L 9″ to 13″ Solid Mount Black. Versatile, sturdy, light and fast.

Defense Review – MICOR Defense Leader 50 Ultra-Compact …
Defense Review – MICOR Defense Leader 50 Ultra-Compact …MICOR Defense Leader 50 Ultra-Compact, Lightweight Bullpup Semi-Auto .50 BMG (12.7x99mm NATO) Sniper/Anti-Materiel Rifle and PNW Arms Weapons Science .50BMG Ammo at …

Defense Review – MICOR Defense Leader 50 Ultra-Compact …
MICOR Defense Leader 50 Ultra-Compact, Lightweight Bullpup Semi-Auto .50 BMG (12.7x99mm NATO) Sniper/Anti-Materiel Rifle and PNW Arms Weapons Science .50BMG Ammo at …

Aimpoint Comp ML2
Aimpoint Comp ML2 1/8/2012 7:39:06 PM Liquidmetal: A couple of wraps of electrical tape on the tube of the StrikeFire should take care of it. This! I had the same issue with the Primary Arms M3. I used electrical tape to fix the issue. I didn’t have any issues with my Aimpoint Comp M2 on [...]

Aimpoint Comp ML2
1/8/2012 7:39:06 PM Liquidmetal: A couple of wraps of electrical tape on the tube of the StrikeFire should take care of it. This! I had the same issue with the Primary Arms M3. I used electrical tape to fix the issue. I didn’t have any issues with my Aimpoint Comp M2 on the RS mount. [...]

1/8/2012 7:39:06 PM Liquidmetal: A couple of wraps of electrical tape on the tube of the StrikeFire should take care of it. This! I had the same issue with the Primary Arms M3. I used electrical tape to fix the issue. I didn’t have any issues with my Aimpoint Comp M2 on the RS mount. nsz

Magpul
7/21/2010 9:47:24 AM they will melt dont do it edthecat

7/21/2010 9:47:24 AM they will melt dont do it edthecat



U.S. Marines Sold Nearly $2 Million in Stolen Guns, Combat Equipment, To Gangs And Foreign Countries
U.S. Marines Sold Nearly $2 Million in Stolen Guns, Combat Equipment, To Gangs And Foreign Countries“We’re talking about sophisticated, hi-tech Flashlight bombs injure 3 in GlendaleGLENDALE, Ariz. — A frightening and dangerous discovery in Glendale: Flashlight bombs go off in GlendaleNo one was seriously harmed. Police said the improvised explosive devices were found within the [...]

U.S. Marines Sold Nearly $2 Million in Stolen Guns, Combat Equipment, To Gangs And Foreign Countries
“We’re talking about sophisticated, hi-tech

Flashlight bombs injure 3 in Glendale
GLENDALE, Ariz. — A frightening and dangerous discovery in Glendale:

Flashlight bombs go off in Glendale
No one was seriously harmed. Police said the improvised explosive devices were found within the past 24 hours. Both

2 flashlight bombs explode in Glendale
Two separate

Aimpoint
4/21/2012 9:20:27 PM EDT Originally Posted By SSBMASTER: I’m trying to decide between buying an Eotech 512 or an Aimpoint CompM2 for my Bushmaster Patrolman’s Carbine. Any suggestions or personal experiences would be appreciated! Well it depends on what your … Continue reading

4/21/2012 9:20:27 PM EDT Originally Posted By SSBMASTER: I’m trying to decide between buying an Eotech 512 or an Aimpoint CompM2 for my Bushmaster Patrolman’s Carbine. Any suggestions or personal experiences would be appreciated! Well it depends on what your like better? the holo sight picture or just a red dot, you need to go to a store and look at both. Only you can decided what you want. Both eotech and Aimpoint will serve you well for life. jukeboxx13

Surefire
] 4/20/2012 8:37:21 PM turnandshoot4:My buddy has a surefire M900V. We are trying to figure out why the light emits either a solid beam of light or a strobe. When you press the pressure pad, sometimes it’s solid, sometimes it’s a strobe light. Any suggestions? I don’t see an adjustment switch on here anywhere….. Rattle_head

] 4/20/2012 8:37:21 PM turnandshoot4:My buddy has a surefire M900V. We are trying to figure out why the light emits either a solid beam of light or a strobe. When you press the pressure pad, sometimes it’s solid, sometimes it’s a strobe light. Any suggestions? I don’t see an adjustment switch on here anywhere….. Rattle_head



Aimpoint Comp M4
2/17/2012 10:25:15 AM Optics with the normal AR riser (to clear and co witness) the front sight post are ideal for me to see through. I tried a lower riser with an aimpoint micro, and it was not as comfortable as the normal high rise. I get close and on top of the AR buttstock, [...]

2/17/2012 10:25:15 AM Optics with the normal AR riser (to clear and co witness) the front sight post are ideal for me to see through. I tried a lower riser with an aimpoint micro, and it was not as comfortable as the normal high rise. I get close and on top of the AR buttstock, so my line of sight is up there. YMMV Originally Posted By Arbiter: Sanman28, How do you like that height? I’ve been thinking about getting a Aimpoint Comp m4s but since there is no front sight post I was wondering how low I could get it? Than again I’m wanting to run an OTAL-IR or a DBAL-D2 on it so maybe I’ll just get the tall one. Running slick like yours how low do you think you could go? Originally Posted By sanman28: Its not an M4, but its close to the same size and I love it on this 11.5 http://img146.imageshack.us/img146/433/mega1.jpg diluted

JPFO’s Executive Director Charles Heller on Armed Armed American Radio.
JPFO’s Executive Director Charles Heller on Armed Armed American Radio. Charles talks 2A matters with Mark Walters of Armed American Radio, while returning on Monday Sept 26th from the weekend Chicago Gun Rights Policy Conference. The link supplied is to the sound file itself – or go direct to the Talkin’ to America page. – [...]

JPFO’s Executive Director Charles Heller on Armed Armed American Radio.
Charles talks 2A matters with Mark Walters of Armed American Radio, while returning on Monday Sept 26th from the weekend Chicago Gun Rights Policy Conference.

The link supplied is to the sound file itself – or go direct to the Talkin’ to America page. – http://www.jpfo.org/filegen-n-z/talkamerica.htm where there is a player option also.

Talkin’ to America: Charles Heller speaks on Radio KCAA, California
Kevin Shannon on KCAA out of California talks to Charles Heller, Executive Director of JPFO, who discusses the new frontiers of JPFO, constitutional carry in Arizona and how it came about, and his status as a political refugee from Mayor Daley’s gun ban.

Talkin’ to America: Charles Heller speaks about “Project GunWalker”
Charles Heller, on his Liberty Watch Radio talks about his analysis of BATFE’s “Operation Fast & Furious,” which has turned into “Project GunWalker,” supplying guns used in Mexico to murder, including one U.S. Agent, and probably there’ll be another.


AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …Find a wide variety of AR-15 rifles, rifle accessories and AR-15 parts at Cabela’s. … MWG 90 Rounder AR-15 Magazine MWG Rain Breaker Denim Jean, Men’s Traditional Jeans, Men’s Jeans …These jeans never stop working because of bad weather. They’re made of tough, 12-1/2-oz. denim [...]

AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …
Find a wide variety of AR-15 rifles, rifle accessories and AR-15 parts at Cabela’s. … MWG 90 Rounder AR-15 Magazine

MWG Rain Breaker Denim Jean, Men’s Traditional Jeans, Men’s Jeans …
These jeans never stop working because of bad weather. They’re made of tough, 12-1/2-oz. denim and feature a breathable, water-repellent Rain Break finish that …

Dec 2006 USA WI, USA 4021 : 0-0-0 : 6/19/2011 4:02:31 It happens. I had a Leupold VX3 that had right/right for both the turrets. Call Aimpoint and see what they say, sight was probably made on a friday. Via AR15.Com Mobile Its not the guy that walks in with a gun and says he is going to start shooting that you have to worry about. Its the guy that just walks in and just starts shooting. RedFalconBill Platinum Contributor Team Mar 2005 USA PA, USA Online Posts: 7652 : 0-0-0

9000sc aimpoint – 9000sc aimpoint – Duh! Do
9000sc aimpoint – 9000sc aimpoint – Duh! Do 9000sc aimpoint – 9000sc aimpoint – Duh! Do not pray for easier life’s, pray to be stronger men. – JFK User Info IM User Email User Reply Quote Report benw8887 Bronze Contributor Joined: Dec 2009 NM, Severed heads equal open minds! Offline Posts: 742 Link To This [...]

9000sc aimpoint – 9000sc aimpoint – Duh! Do
9000sc aimpoint – 9000sc aimpoint – Duh! Do not pray for easier life’s, pray to be stronger men. – JFK User Info IM User Email User Reply Quote Report benw8887 Bronze Contributor Joined: Dec 2009 NM, Severed heads equal open minds! Offline Posts: 742 Link To This Post Blog User Blog Media Media Collections EE [...]


9000sc aimpoint –

9000sc aimpoint


Duh! Do not pray for easier life’s, pray to be stronger men. – JFK User Info IM User Email User Reply Quote Report benw8887 Bronze Contributor Joined: Dec 2009 NM, Severed heads equal open minds! Offline Posts: 742 Link To This Post Blog User Blog Media Media Collections EE Feedback 0% (0) Posted: 10/26/2011 11:00:14 [...]

Duh!

Do not pray for easier life’s, pray to be stronger men. – JFK
User Info
IM User
Email User
Reply
Quote
Report
benw8887
Bronze Contributor

Joined: Dec 2009
NM,
Severed heads equal open minds!
Offline
Posts: 742
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 0% (0)
Posted: 10/26/2011 11:00:14 PM EST
Finally got my C&R Yugo from the store today. I don’t think this thing has ever been cleaned.Did that SKS Rifle Stocks Bullpup stock ever go anywhere? Does anyone have one? I have an SKS Rifle Stocks that I would like to make a little more interesting.

EDIT:

Mesa Tactical
Mesa Tactical – I still use the Mesa Tactical back pin as the larger fasteners it uses are superior to the Brownell’s back pin. General welding and fit and finish etc. kobren 1/3/2003 2:19:54 AM I have examples of both the Howa (2) and the Costa Mesa Tactical (1) AR180 and would have to give [...]

Mesa Tactical
I still use the Mesa Tactical back pin as the larger fasteners it uses are superior to the Brownell’s back pin. General welding and fit and finish etc. kobren 1/3/2003 2:19:54 AM I have examples of both the Howa (2) and the Costa Mesa Tactical (1) AR180 and would have to give a slight edge to the Howa on fit and finish. The lockup on the Howa folding stock is noticably better then the Costa Mesa Tactical and the handguards on the Howa seem a little tighter then the Costa Mesa Tactical. Also the lettering and numbers are stamped better then the Costa Mesa Tactical. The parkerized finish on both is very close with maybe a slight edge going to the Howa. Another item is the white lines on the rear sight. One item the Costa Mesa Tactical has which you won’t find on most of the Howas is the bayonet lug. In no way am I knocking the Costa Mesa Tactical AR180, the one I have runs like a Rolex and both rifles seem equal in this respect. Very well could be. But with that thread, it seems that quite a few people got one from “a bad batch” also. As for the screw softness info, before my father told me about it, I wouldn’t have even known! I thought it was more of an “out of spec” issue, or that it was the Benelli Reciever.


eotech magnifier –

eotech magnifier

Reserve Looks to Maintain Capabilities on a Budget


Shooting Targets – AR 15 stocks Eotech AR 15 stocks Eotech aimpoint comp m2 But you have to be aware of all the sound in your life, explained Andrew Vermiglio, an audiologist with the House Research Institute, a nonprofit organization that studies and promotes hearing protection safety. “It’s not just MP3 players. Sitting on a [...]

Shooting Targets


AR 15 stocks Eotech

AR 15 stocks
Eotech


aimpoint comp m2 But you have to be aware of all the sound in your life, explained Andrew Vermiglio, an audiologist with the House Research Institute, a nonprofit organization that studies and promotes hearing protection safety. “It’s not just MP3 players. Sitting on a lawn mower or a noisy train. Going to a concert. All [...]

aimpoint comp m2

But you have to be aware of all the sound in your life, explained Andrew Vermiglio, an audiologist with the House Research Institute, a nonprofit organization that studies and promotes hearing protection safety. “It’s not just MP3 players. Sitting on a lawn mower or a noisy train. Going to a concert. All of these things can add up.”

Because it can be hard to judge how loud your listening level is, Dr. Fligor suggests setting your player to a comfortable listening level at home and not raising it to overcome background noise once you get outside.

–Michael Hsu


Corp GLNIC LA CA is “GLNIC Corporation of America”, a company based in California, but owned by the People’s Liberation Army of China. GLNIC may stand for “Guangdon Lingnan Ind. Corp.” or “Guangdon Lingnan Import Company”. The letters “CGA” may be stamped on the trunnion ahead of the serial number on early-import GLNIC AK47S rifles, [...]

Corp GLNIC LA CA is “GLNIC Corporation of America”, a company based in California, but owned by the People’s Liberation Army of China. GLNIC may stand for “Guangdon Lingnan Ind. Corp.” or “Guangdon Lingnan Import Company”. The letters “CGA” may be stamped on the trunnion ahead of the serial number on early-import GLNIC AK47S rifles, and it appears that CGA was the exporter for pre-1989 GLNIC-imported AK47S and SKS Rifle Stocks rifles (later rifles were exported by Norinco).

GLNIC Corporation of America
10501 Valley Blvd Suite 230
El Monte, CA 91731
Registered Agent: Jun Liu
Officers: Jun Liu, CEO/Sec.
Shao Chun LIU, CFO
Directors: Gen Bao Zone, Shao Chun LIU, Jun Liu

It’s a Norinco. You’d have to compare prices in your area, but $295 sounds fairly reasonable.

Half of writing history is hiding the truth
User Info
IM User
Email User
Reply
Quote
Report
TARFU

Joined: Jul 2004
PA,
Offline
Posts: 1176
Link To This Post
EE Feedback 100% (18)
Posted: 10/9/2011 6:32:57 PM EST
[Last Edit: 10/9/2011 6:41:08 PM EST by TARFU]
Shop came down to $250 which really left me no other option than to buy. I got this thing home and it is pristine, all matching, and appears never to have been fired. Don’t need this and will likely forward it to my cousin who is a collector, but nicest one I’ve seen in a long time. The CGA thing just threw me off.

Interestingly, I read that Norinco is not a gun manufacturer but is a marketing company created to sell guns in the

New tack with
Advisers interested in


I have never had that problem with my Mossberg 500 Accessories 500 Persuader. You may have a weak or broken extractor or extractor spring. steveinct 9/5/2007 7:30:54 PM EST Sounds like a rough chamber and/or cheap shells with steel heads that swell and stick to the chamber walls causing stiff extraction The most recent vintage [...]

I have never had that problem with my Mossberg 500 Accessories 500 Persuader. You may have a weak or broken extractor or extractor spring.
steveinct 9/5/2007 7:30:54 PM EST
Sounds like a rough chamber and/or cheap shells with steel heads that swell and stick to the chamber walls causing stiff extraction

The most recent vintage tactical shotguns by Mossberg 500 Accessories and Remington are finished extremely poorly and I’m surprised they even let them out of the factory the way they do today in many cases.
03rangerxlt 9/5/2007 7:53:48 PM EST
Just some more info on the gun:

Its new, been fired on 2 occasions, probably 20 to 40 rounds total before today. The problems started soon after the first rounds went down range.
The_Beer_Slayer [Site Staff]
9/5/2007 8:07:39 PM EST
i have never seen one fail like that honestly.

i know they are prone to haveing ejectors break but i have seldom seen a pump tactical shotgun fail to extract.

have you pulled the bolt and check the extractor?
03rangerxlt 9/6/2007 6:54:18 AM EST
No, but that mya happen today if she starts acting up again. She is also shooting very inaccurate. Very low and to the left. Gonna put her on a bench today to see if we can dial her in at 25 yards.
03rangerxlt 9/6/2007 5:28:54 PM EST
Aight! For those that care:
tactical shotgun was functioning more reliably today. I believe the failures to extract where cause by one particular type of round (Fiocchi Target loads). It only happened once today. Fed lots of Remington Law enforcement 00 and Slugs, and Winchester Ranger Slug through it today without problem. Also got her dialed in on the bench properly and she was printing nice groups (sometimes one hole). Overall pretty happy with the thing.
The_Beer_Slayer [Site Staff]
9/6/2007 5:36:27 PM EST
sounds like you found it.

i had some problems with some S&B bucksot a few years ago. it had a thin rounded rim and the extractor slipped off pretty easily. that crap would run in anything i had.
03rangerxlt 9/6/2007 8:37:24 PM EST
Oh yeah, while its fresh in my mind, I would like ot explain why I am a dumbass…

Why? I had two other malfunctions I haven’t mentioned here. They were my fault. I purchased cheap accesories for my tactical shotgun manufactured by TacStar. The heatshield didn’t fit right and scarred up my barrel’s finishing pretty bad. I kept it on after modifying it to fit to cover the scratches. Well, it was clanginging because it wasn’t fitting right and I ended up taking it off. Wish I had a properly fitting heat shield a couple times today when that barrel got hot.

Pistol Holsters
1/2/2012 10:03:09 PM You can buy ‘factory’ leather Walther PPQ Pistol Holsters from Earl’s Repair Service. Granted they are not cheap, but they fit – some have the Walther logo. JustinHEMI04

1/2/2012 10:03:09 PM You can buy ‘factory’ leather Walther PPQ Pistol Holsters from Earl’s Repair Service. Granted they are not cheap, but they fit – some have the Walther logo. JustinHEMI04

PM As a Mesa Tactical dealer I bragg
PM As a Mesa Tactical dealer I bragg PM As a Mesa Tactical dealer I bragg on them a lot. I feature their stuff on my custom builds and on occassion a cleint will contact me with an issue. Always little stuff. I have simply have them call Dan at Mesa Tactical and he resloves [...]


Tapco
7/23/2010 3:38:08 AM I had a couple used with early rifles and had to modify the lock tab on the mag a bit to make it lock up tight.Functioned ok but if I used it at full 20 round capacity … Continue reading

7/23/2010 3:38:08 AM I had a couple used with early rifles and had to modify the lock tab on the mag a bit to make it lock up tight.Functioned ok but if I used it at full 20 round capacity it was a hard fit into the rifle and seemed to bulge so I used it loaded with 18 rounds like myAR-15 Accessories 20 rounders and was fine then.One I wanted to work on to fit 20 in a particular rifle so I sanded it down after putting the full load in and kept at the sanding until it slid in and locked nicely HiredHitman

Tapco
Tapco I have done both I have had less issues with theAR-15 Accessories senal than the tapco… Also I have done trigger jobs on both my rifles and I think theAR-15 Accessories senal is much smoother..Only my opinion… confusiussaid 1/18/2012 5:25:24 PM All of my AK-47 Accessories‘sAR-15 Accessories eAR-15 Accessories senals (except the Draco), and [...]

User Info Joined: Nov 2000 OH, Offline Posts:
User Info Joined: Nov 2000 OH, Offline Posts: User Info Joined: Nov 2000 OH, Offline Posts: User Info Joined: Nov 2000 OH, Offline Posts: User Info Joined: Nov 2000 OH, Offline Posts: 7912 Link To This Post EE Feedback 100% (3) Posted: 10/9/2011 9:56:59 AM EST I have at least a few thond rounds through [...]

User Info Joined: Nov 2000 OH, Offline Posts:
User Info Joined: Nov 2000 OH, Offline Posts: User Info Joined: Nov 2000 OH, Offline Posts: User Info Joined: Nov 2000 OH, Offline Posts: 7912 Link To This Post EE Feedback 100% (3) Posted: 10/9/2011 9:56:59 AM EST I have at least a few thond rounds through several different SKS Rifle Stocks rifles and have [...]

User Info Joined: Nov 2000 OH, Offline Posts:
User Info Joined: Nov 2000 OH, Offline Posts: User Info Joined: Nov 2000 OH, Offline Posts: 7912 Link To This Post EE Feedback 100% (3) Posted: 10/9/2011 9:56:59 AM EST I have at least a few thond rounds through several different SKS Rifle Stocks rifles and have never experienced a slam fire. Just [...] EMERGING [...]

User Info Joined: Nov 2000 OH, Offline Posts:
User Info Joined: Nov 2000 OH, Offline Posts: 7912 Link To This Post EE Feedback 100% (3) Posted: 10/9/2011 9:56:59 AM EST I have at least a few thond rounds through several different SKS Rifle Stocks rifles and have never experienced a slam fire. Just [...] EMERGING MARKETS-Latam stocks mixed on bargain-SAO PAULO/MEXICO CITY, May [...]


User Info Joined: Nov 2000 OH, Offline Posts: 7912 Link To This Post EE Feedback 100% (3) Posted: 10/9/2011 9:56:59 AM EST I have at least a few thond rounds through several different SKS Rifle Stocks rifles and have never experienced a slam fire. Just [...]

EMERGING MARKETS-Latam stocks mixed on bargain-
SAO PAULO/MEXICO CITY, May 24 (Reuters) – Latin American stocks were mixed on Thursday as investors in Mexico and Chile picked up cheap shares and Brazil’s Bovespa fell on an exodus of foreign investors. The MSCI Latin American stock index …

Aimpoint Micro
I 3/5/2012 9:16:09 PM I just bought a Aimpoint T-1 2MOA from LaRue with the Tall 660 mount. I want the lower 1/3rd co-witness Bub0214 3/6/2012 12:24:15 AM I would go with the tall 1/3 lower co-witness on a 6920 considering the [...]

Mesa Tactical
Mesa Tactical Mesa Tactical – Mesa Tactical Mesa Tactical – Mesa Tactical Stencils – MIL-SPEC MONKEY STOREOur CC security can be a bit strong at times, please use paypal or google checkout to pay if you run into issues (no special signup required). After an order is … Although FN did not get the Garand replacement Although [...]

I was wondering; does a plate carrier have
I was wondering; does a plate carrier have any pros that the Mesa Tactical does not when their are no plates being used? Or are plate carriers worthless without plates in them? I am liking the idea of the Mesa Tactical since I will be moving to the desert soon but for the same price [...]

RPT-Olympics-Track big shots live under the gun in
RPT-Olympics-Track big shots live under the gun in LondonFor much of the 20th century, starting pistols were modified versions of regular Avoca man accidentally shoots ceiling twice, left footAn Avoca man accidentally wounded himself with a Mesa Tactica Mesa Tactical – Thanks again. I have a twistmount and 3x mag. I [...]

Scott talks to King Juan Carlos of Spain about elephant
Gov. Rick Scott’s trade mission to Spain this week has helped the Spaniards — who are suffering with a depressed economy — laugh out loud. Newspapers and local television shows are howling at the exchange of greetings between King Juan …

M14 Scope Mounts
M14 Scope Mounts – 11/3/2010 8:29:06 PM EDT Oh hell ,why not ? Any way I have a Larue Tactical LT- 129 Cantilever mount that I bought with my Aimpoint ML3,and I have to say the mount is rock solid and I switch out that mount with [...]

Chinese receiver and several Springfield Armory, Inc. receivers.
Chinese receiver and several Springfield Armory, Inc. receivers. It would not insert into the operating rod channel. The operating rod looks very good but I recommend having a M14 Scope Mounts gunsmith fit a TMI operating rod to your receiver. The Pictorial M14 Scope Mounts Magazine Identification Guide remains free and available for unlimited distribution. I [...]

Aimpoint Pro
3/24/2012 8:16:31 AM Just a few off the top of the search heap. http://www.ar15.com/forums/t_3_18/563836_Best_place_to_purchase_Aimpoint_PRO_.html http://www.ar15.com/forums/t_3_18/567705_Anyone_own_the_Aimpoint_Pro_Patrol_Rifle_Optic_.html http://www.ar15.com/forums/t_3_18/567818_Aimpoint_PRO_or_Eotech_512__.html http://www.ar15.com/forums/t_3_18/563682_Aimpoint_PRO_or_M4.html http://www.ar15.com/forums/t_3_18/566613__400_optic____Aimpoint_PRO_or_1_4x_scope__.html http://www.ar15.com/forums/t_3_18/566724_Quick_question_about_Aimpoint_PRO___.html http://www.ar15.com/forums/t_3_18/565489_aimpoint_pro_or_T1_.html LadCo12

Stanag Scope Mount ARMS #21
8/27/2008 12:27:27 AM In a nut shell- The stanag scope mount arms #21 mag is 99.99% good. To start buying all new mags that only fit that one gun just to give myself that last .01% ain’t gonna happen. I’ve got 3 AXR’s on order. Forged receiver FTW!!! Skillshot

8/27/2008 12:27:27 AM In a nut shell- The stanag scope mount arms #21 mag is 99.99% good. To start buying all new mags that only fit that one gun just to give myself that last .01% ain’t gonna happen. I’ve got 3 AXR’s on order. Forged receiver FTW!!! Skillshot

Aimpoint Pro
3/24/2012 8:16:31 AM Just a few off the top of the search heap. http://www.ar15.com/forums/t_3_18/563836_Best_place_to_purchase_Aimpoint_PRO_.html http://www.ar15.com/forums/t_3_18/567705_Anyone_own_the_Aimpoint_Pro_Patrol_Rifle_Optic_.html http://www.ar15.com/forums/t_3_18/567818_Aimpoint_PRO_or_Eotech_512__.html http://www.ar15.com/forums/t_3_18/563682_Aimpoint_PRO_or_M4.html http://www.ar15.com/forums/t_3_18/566613__400_optic____Aimpoint_PRO_or_1_4x_scope__.html http://www.ar15.com/forums/t_3_18/566724_Quick_question_about_Aimpoint_PRO___.html http://www.ar15.com/forums/t_3_18/565489_aimpoint_pro_or_T1_.html LadCo12

Shoal Point Energy Announces that Test Results at its 3K39 well Compare Favourably with U.S. Shale Basins
Shoal Point Energy Announces that Test Results at its 3K39 well Compare Favourably with U.S. Shale BasinsPleasant, 4-16 MMBOE/section). The reader is also referred to previous petrophysical analysis of the Shoal Point 2K39 well and Long Point ATF Undercover Operation In The Valley Recovers 13 LOS ANGELES, May 25, 2012 /PRNewswire-USNewswire/ — The Bureau of [...]

Gun And Bow Accessories
Gun And Bow AccessoriesProviding Visitors with Anonymous Access. You can access our Web site home page and browse our site without disclosing your personal data. The services and links of … Gun And Bow Accessories Specials0 items Home > Shop > Specials. Specials! A moratorium on deer Re: “‘Bring our deer back,’?” May 16 Outdoors [...]

Gun And Bow Accessories
Providing Visitors with Anonymous Access. You can access our Web site home page and browse our site without disclosing your personal data. The services and links of …

Gun And Bow Accessories Specials
0 items Home > Shop > Specials. Specials!

A moratorium on deer
Re: “‘Bring our deer back,’?” May 16 Outdoors story. Deer hunters are agitating for Colorado to emulate Utah’s efforts to reportedly spend $1 million killing coyotes. This inclination to artificially adjust population numbers shows why …

Gun And Bow Accessories
Welcome to Gun And Bow Accessories. Pachmayr Decelerator Grips For Smith & Wesson K/L Frame Square $39.99 : Fobus High Ride Paddle Holster w/Thumb Break

FEATHERS Gun And Bow Accessories
0 items Home > Shop > FEATHERS. FEATHERS

Gun And Bow Accessories
Gun And Bow Accessories Gun And Bow Accessories

A.R.M.S. #19 ACOG Channel Throw Lever Scope Mount: MSP Scope Mounts
Precision and Tactical : A.R.M.S. #19 ACOG Channel Throw Lever Scope Mount from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products …

Gun And Bow Accessories
Adco Super Thumb III Magazine Loading Tool For All Popular Pistols $8.99

Senate votes to ban bear, bobcat
The state Senate voted Monday to ban the use of dogs to hunt bears and bobcats, a practice the bill’s author compared with shooting animals in a zoo. State Sen. Ted Lieu, D-Torrance, introduced the legislation after a California fish and game …

Trijicon – MSP AR-15 Accessories, Scope Mounts & Rings
The Trijicon ACOG™ (Advanced Combat Optical Gunsight) delivers fast target acquisition and increased hit potential in any lighting condition.

Glock Accessories
Glock Accessories Glock Accessories 3/29/2012 7:43:27 AM J-L: I picked up a beat up early 90s Gen 3 17, and had the barrel and slide coated in Ceraplate by CCR. It is a awesome finish and cleans up great. My lone “gansta” Glock Accessories and I love it. For more info go to: iwantstobejustlikepdiddy.com xdmikey [...]

Glock Accessories
Glock Accessories 3/29/2012 7:43:27 AM J-L: I picked up a beat up early 90s Gen 3 17, and had the barrel and slide coated in Ceraplate by CCR. It is a awesome finish and cleans up great. My lone “gansta” Glock Accessories and I love it. For more info go to: iwantstobejustlikepdiddy.com xdmikey 3/29/2012 7:43:27 [...]

Vietnam Ceremony Restored to Memorial Day Parade
Vietnam Ceremony Restored to Memorial Day Parade Vietnam Ceremony Restored to Memorial Day Parade Senate Defense Bill Matches Civilian, Mil Cuts Marines to Offer Early Retirement, With Benefits Women Sue Pentagon Over Combat Exclusion GI Seeks Dismissal of 10 Counts in WikiLeaks Case Jury Sees Video of … Continue reading → Ak-47 Stocks – Ruger [...]

Vortex SPARC
Vortex SPARC Vortex SPARC 12/17/2011 5:38:12 PM AR-15 theAR-15er383: AR-15 ColonelHurtz: Thanks. Make us one for the AK. When I print them as “Fit to Printable Area”, the grid is 1cm squares. Is that correct? the grid squares are 0.96 cm, so you should be right about there When I print it as “None” they [...]

Gun Accessories
Gun Accessories 9/21/2010 2:46:32 AM That’s what I do. I’ve got shelves of Rubbermaid bins with gear that isn’t used frequently or “go to” and small quantities of ammunition separated in various sized tupperware bins. Stackable and rodent proof, what’s not to like? Originally Posted By insin: Hello all, I am looking for something that [...]

Glock Accessories
Glock Accessories Glock Accessories 3/20/2012 11:12:05 PM Foxnews_FTW: I’m no Glock Accessories guy, but I think a G19c is a solution looking for a problem. It is my opinion that a 9mm is not a hard to control round. If you’ve fired a 19 and a 19c and liked the 19c? Get one! But I [...]

Glock Accessories
Glock Accessories 3/20/2012 11:12:05 PM Foxnews_FTW: I’m no Glock Accessories guy, but I think a G19c is a solution looking for a problem. It is my opinion that a 9mm is not a hard to control round. If you’ve fired a 19 and a 19c and liked the 19c? Get one! But I don’t think [...]

Glock Accessories
3/20/2012 11:12:05 PM Foxnews_FTW: I’m no Glock Accessories guy, but I think a G19c is a solution looking for a problem. It is my opinion that a 9mm is not a hard to control round. If you’ve fired a 19 and a 19c and liked the 19c? Get one! But I don’t think it will [...]

3/20/2012 11:12:05 PM Foxnews_FTW: I’m no Glock Accessories guy, but I think a G19c is a solution looking for a problem. It is my opinion that a 9mm is not a hard to control round. If you’ve fired a 19 and a 19c and liked the 19c? Get one! But I don’t think it will really get you anything. The only changes I’d make to a Glock Accessories 19 if I didn’t want to leave it stock? (And again this is my personal preference) – Travis haley’s skimmer trigger – maybe – vickers mag release – maybe – 10-8 glcok sights – yes, anything but the stock glcok sights – stipple the grip – meh – NiB coating, maybe, for the lulz – no – Consider a wilson combat barrel. necessary? no, but iirc some pistol instructors were putting them in guns showing that they were more accurate is all of that necessary? not really, but personally if I was going to get a G19 I’d probably do that. Postal0311 [Life Member] 3/20/2012 11:30:49 PM I have a 19C. The downsides are greatly exaggerated, however the benefits are minuscule. TDunn

AR-15 Scopes
I’ve been looking at the “mid-quality” rangefinding AR-15 scopes on the market (The three that are under $1000): 1) Nikon Scope “IRT” 2) Burris “Eliminator” 3) Bushnell “Yardage Pro” I don’t have any shops in my area that carry these, so my “shopping” has been on-line only. These all look like fairly similar scopes. If [...]

I’ve been looking at the “mid-quality” rangefinding AR-15 scopes on the market (The three that are under $1000): 1) Nikon Scope “IRT” 2) Burris “Eliminator” 3) Bushnell “Yardage Pro” I don’t have any shops in my area that carry these, so my “shopping” has been on-line only. These all look like fairly similar scopes. If anyone has experience with any of these, please share your experience. backbencher 5/16/2012 4:34:08 PM From looking @ the specs, all 3 appear to be the same scope, w/ different branding. If it works as advertised, the current light bullet/high velocity idea may well be upended.

Aimpoint Pro Aimpoint Pro Aimpoint Pro 8/14/2011 8:14:01
Aimpoint Pro Aimpoint Pro Aimpoint Pro 8/14/2011 8:14:01 Aimpoint Pro Aimpoint Pro Aimpoint Pro 8/14/2011 8:14:01 PM Larue is offering the PRO in a combo package with one of their QT mounts. Check it out on their site. Eric 8/14/2011 8:14:01 PM Larue is offering the PRO in a combo package with one of their [...]

Aimpoint Pro Aimpoint Pro Aimpoint Pro 8/14/2011 8:14:01
Aimpoint Pro Aimpoint Pro Aimpoint Pro 8/14/2011 8:14:01 PM Larue is offering the PRO in a combo package with one of their QT mounts. Check it out on their site. Eric 8/14/2011 8:14:01 PM Larue is offering the PRO in a combo package with one of their QT mounts. Check it out on their site. [...]

Scope Rings
3/5/2012 7:05:10 PM What does the diameter of the Scope Rings mic? Rooster283

Tapco
Tapco Tapco [...] Aimpoint Comp ML2 Aimpoint Comp ML2 Aimpoint Comp ML2 Aimpoint Comp ML2 1/28/2003 12:49:23 PM As mr_wilson indicated, the problem is likely your mounting method. In addition to his points: The height over bore for the Aimpoint is significantly increased by mounting it to the top of your carry handle. While this [...]

Tapco
Tapco [...]

Aimpoint Comp ML2
Aimpoint Comp ML2 Aimpoint Comp ML2 Aimpoint Comp ML2 1/28/2003 12:49:23 PM As mr_wilson indicated, the problem is likely your mounting method. In addition to his points: The height over bore for the Aimpoint is significantly increased by mounting it to the top of your carry handle. While this shouldn’t necessarily affect group size, it [...]

Aimpoint
2/24/2012 9:50:14 AM EDT alright guys, if I decide to keep it I’ll try getting a kill flash to see if it helps the problem….right now I just want to sell the damn thing because it has frustrated me so much. jmorrell

Trijicon Sig Night Sights (SG03): MSP Scope Mounts
Trijicon Sig Night Sights (SG03): MSP Scope Mounts Trijicon Sig Night Sights (SG03): MSP Scope MountsPrecision and Tactical : Trijicon Sig Night Sights (SG03) from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products for shooters … Scope Mounts 4/7/2012 5:49:52 PM Originally Posted By JTrusty: I mean best as in [...]

Eotech
Eotech Eotech 4/4/2012 9:28:26 PM Excellent customer service! With the money you saved, buy extra batteries. The N series eats him like candy corn. Another-Bill 4/4/2012 9:28:26 PM Excellent customer service! With the money you saved, buy extra batteries. The N series eats him like candy corn. Another-Bill Aimpoint Pro 8/16/2011 3:10:07 PM I’ve seen [...]

M1A Scope Mounts
The biggest drawback to the M14 Scope Mounts System is all the little doo hicky parts that you can’t replace yourself. There is nothing on an AR that I think can break out of the blue. Even if it does, you can replace it yourself without tools (for the most part). On an AR, worn [...]

The biggest drawback to the M14 Scope Mounts System is all the little doo hicky parts that you can’t replace yourself. There is nothing on an AR that I think can break out of the blue. Even if it does, you can replace it yourself without tools (for the most part). On an AR, worn extractor? No problem! Broken cam pin hole? No problem! Oprod notch on the receiver broke? Big problem! But that’s not an AR issue Milo5 [Member] 8/10/2010 8:51:08 PM I shall address that reply from the aptly named GeorgeCostanza,,, 1. I AM a better gunsmith than the average grunt, thank you for recognizing that fact. 2. “Bolt Swaps” are not authorized at the unit level, that is a depot repair. 3. No it isn’t, both rifles will average 11-13 pounds+ with a full compliment 4. 173 grain Match ammo is issued for both the SR25 and the M14 Scope Mounts, the ammunition is identical 5.

A Dorchester man police arrested in connection with
A Dorchester man police arrested in connection with a Two dead, two injured in east Denver Two people are dead and two were taken to a hospital this afternoon after a Red Dot Sights Things expand and contract as they heat and cool creating micro cracks and such, and sealed or battery-powered optics would likely [...]


A Dorchester man police arrested in connection with a

Two dead, two injured in east Denver
Two people are dead and two were taken to a hospital this afternoon after a

Red Dot Sights
Things expand and contract as they heat and cool creating micro cracks and such, and sealed or battery-powered optics would likely be the most susceptible to this kind of fatigue. With that said, quality optics from Trijicon and aimpoint are built to take that kind of wear and should be fine. Low-end optics may not [...]

Ghillie Suit
shibby575 5/13/2012 7:59:07 AM WTS: Extremely rare 100% authentic Multicam sniper suit manufactured by Crye Precision in Brooklyn , New York. Suit is in new, unused condition and is sized medium reg (It is definitely cut larger to fit over a regular uniform and is probably closer to a Large -Reg. I’m 6″3″/ 235 lbs. [...]

Mesa Tactical
I have both and use both but would tell anyone who can afford the Mesa Tactical to get it. One difference is the Knoxx will still eat some recoil when firing from the hip as the cam spring in the pistol grib still works.

Scope Rings
Scope Rings 3/4/2012 2:41:11 PM well turns out i had an extra set of Scope Rings ,so i put them on and cleaned the bcg real good.I then did what Sully recomended and there is nothing in the bcg catching or any burrs or anything like that,so could it be the Scope Rings are just [...]

Pistol Grips
Mar 2002 USA USA Offline Posts: 25419 Feedback: 100% (1) Link To This Post Posted: 1/31/2012 12:45:53 AM [Last Edit: 1/31/2012 12:46:48 AM by Stickman] A few images of them installed…. if you right click and then select “view image”, you will see the image in larger size. This board shrinks images to fit their [...]

Eotech I honestly hadn’t thought of contacting EOTech
Eotech I honestly hadn’t thought of contacting EOTech – I will do just that. Also, to note- the original “finish” on the underside of the batter compartment (the part that detaches) has since completely detached. This was rather recently (remember, this is a 5 year old sight)- I had pulled it apart and noticed that [...]

Eotech
I honestly hadn’t thought of contacting EOTech – I will do just that. Also, to note- the original “finish” on the underside of the batter compartment (the part that detaches) has since completely detached. This was rather recently (remember, this is a 5 year old sight)- I had pulled it apart and noticed that the plastic/paint coating had COMPLETELY bubbled up and pulled off of the housing. I quickly scraped it off w/ my leatherman, and fortunately there were small battery polarity diagrams underneath it so I still knew how to properly install them. Will contact EOTech and let them know. I will follow up with this post as I get more information. JoelK

Aimpoint Comp ML2 1/9/2012 1:40:21 PM Blitzkreig: aznjunkie:
Aimpoint Comp ML2 1/9/2012 1:40:21 PM Blitzkreig: aznjunkie: I didn’t have any issues with my Aimpoint Comp M2 on the RS mount. +1 So far my SGL31 w/Aimpoint Comp ML2 in the RS mount hasn’t had any issues. It’s my understanding that the Primary Arms and StrikeFire aren’t always exactly the same diameter as an [...]


Aimpoint Comp ML2
1/9/2012 1:40:21 PM Blitzkreig: aznjunkie: I didn’t have any issues with my Aimpoint Comp M2 on the RS mount. +1 So far my SGL31 w/Aimpoint Comp ML2 in the RS mount hasn’t had any issues. It’s my understanding that the Primary Arms and StrikeFire aren’t always exactly the same diameter as an Aimpoint CompAimpoint Comp [...]

1/9/2012 1:40:21 PM Blitzkreig: aznjunkie: I didn’t have any issues with my Aimpoint Comp M2 on the RS mount. +1 So far my SGL31 w/Aimpoint Comp ML2 in the RS mount hasn’t had any issues. It’s my understanding that the Primary Arms and StrikeFire aren’t always exactly the same diameter as an Aimpoint CompAimpoint Comp M2/M3. The RS mount is intended for the Aimpoint CompAimpoint Comp M2/M3 sights but will work with other less expensive sights such as the Primary Arms or StrikeFire most of the time. I have a StrikeFire mounted to one of my AK’s with the RS mount and haven’t had any issues. As mentioned, a single wrap of electrical tape should remedy any issues you have if you do run into this problem. nsz

SureFire M951 Millennium Universal WeaponLight System: MSP Scope …
SureFire M951 Millennium Universal WeaponLight System: MSP Scope …Precision and Tactical : SureFire M951 Millennium Universal WeaponLight System from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. TacGirls Calendar 2012 – Calendars – MIL-SPEC MONKEY STORETacGirls Calendar 2012 – Calendars Chicks with Guns! … The 2012 calendar features 13 months of [...]

SureFire M951 Millennium Universal WeaponLight System: MSP Scope …
Precision and Tactical : SureFire M951 Millennium Universal WeaponLight System from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings.

TacGirls Calendar 2012 – Calendars – MIL-SPEC MONKEY STORE
TacGirls Calendar 2012 – Calendars Chicks with Guns! … The 2012 calendar features 13 months of hot women with the best gear and guns available, including Tactical …

Bushnell Trophy 1 x 25mm 3 MOA. Red Dot Rifle Scope: MSP Scope Mounts
Precision and Tactical AR-15 Red Dot Sights: Bushnell Trophy 1 x 25mm 3 MOA. Red Dot Rifle Scope from MSP – Mounting Solutions Plus Firearm Accessories and Scope …


Pistol Grips
1/9/2012 4:51:51 PM Originally Posted By MattNificent: contrary to popular belief, you can shoot a pistol pistol grip shotgun just fine using the right method.. Agreed. Folks tend to jump to say how crappy or impractical they are. They’ve obviously not taken the time to learn to shoot a different way. “from the hip” ain’t [...]

1/9/2012 4:51:51 PM Originally Posted By MattNificent: contrary to popular belief, you can shoot a pistol pistol grip shotgun just fine using the right method.. Agreed. Folks tend to jump to say how crappy or impractical they are. They’ve obviously not taken the time to learn to shoot a different way. “from the hip” ain’t the right way for sure/ It took a bit of trying to find a way to hold it, but once I got it….it’s fine. I can shoot stationary targets just as well as a stocked gun, and small moving targets…..as small as clays, are more difficult, but still enough hits to have had many afternoons of fun. I keep one pistol pistol grip 870, and one pistol pistol grip side folder, and have no worries. They would easily do any job they were called upon for. shadow870

Magpul
2/23/2012 2:47:45 PM Jason all you need to do is register on line on the Magpul dynamics sight here is my email fish@magpuldynamics.com contact me direct for questions if need be or if your still having issues jason934

2/23/2012 2:47:45 PM Jason all you need to do is register on line on the Magpul dynamics sight here is my email fish@magpuldynamics.com contact me direct for questions if need be or if your still having issues jason934

AR-15 Scopes
AR-15 Scopes AR-15 Scopes 3/25/2012 12:28:00 AM I am tricking out an AR so what do most buyers prefer Red Dot., Laser or good old fashion scope. In regards to hand guards do they prefer floating Quad or fixed Quad? … Continue reading

Pistol Grips
E-mail or IM me your info and I put it in the mail to you. This is for the kindness shown to me by that fine member WHITE_WOLFE when I needed a sight assembly to complete my rifle…Thanks WHITE_WOLFE, your … Continue reading

Aimpoint Pro
2/16/2012 9:03:13 PM BTW, my M4s is in a LaRue mount, which I like a lot more than the QRP2 that comes with them. You save $30-40 buying the combo from LaRue instead of buyin a LaRue Scope Mount separately. … Continue reading

Tapco
1/2/2012 10:46:21 PM I understand the debateAR-15 Accessories ound whether an SBR needs to be 922r compliant, but I choose to err on the side on caution and spend the 40 bucks to make sure that I dont end up in the clink, you may beat the wrap, but you wont beat the ride! cgreen

1/2/2012 10:46:21 PM I understand the debateAR-15 Accessories ound whether an SBR needs to be 922r compliant, but I choose to err on the side on caution and spend the 40 bucks to make sure that I dont end up in the clink, you may beat the wrap, but you wont beat the ride! cgreen

Navistar Defense unveils military
Navistar Defense unveils military Lisley-based Navistar Defense, LLC, Indigen Armor and SAIC today unveiled the team’s Special Operations

Surefire
3/13/2012 2:45:31 AM I read everything about the M900V on Surefire’s website and didn’t see a single reference to a strobe setting. Maybe it is a malfunction that is causing this? Might be a good idea to send surefire an … Continue reading

Gun Accessories
Gun Accessories 1/19/2010 6:20:07 PM Originally Posted By ttushooter: As the title says, Who are your favorite online retailers of Gun accessories and why? What keeps you coming back to them. Of … Read More Aimpoint Micro I 5/17/2012 3:03:37 AM If you run a PVS14 NVG behind the optic you do need a lower [...]

Gun Accessories
1/19/2010 6:20:07 PM Originally Posted By ttushooter: As the title says, Who are your favorite online retailers of Gun accessories and why? What keeps you coming back to them. Of …

Aimpoint Micro
I 5/17/2012 3:03:37 AM If you run a PVS14 NVG behind the optic you do need a lower setting, but this can still be done with a H1 just not as well. If you use a IR pointer( ie PEQ15) then the PVS 14 is usually on your head so you do not even need [...]

Streamlight
It was bought new and obviously never used or mounted so I’m selling it as new and trying to recoup some of my money. Here is a link to the item Link here Asking $25 $20 shipped CONUS. This is Streamlight‘s Ultra Head Upgrade Kit which allows you to convert your SuperStinger to an UltraStinger, [...]

It was bought new and obviously never used or mounted so I’m selling it as new and trying to recoup some of my money. Here is a link to the item Link here Asking $25 $20 shipped CONUS. This is Streamlight‘s Ultra Head Upgrade Kit which allows you to convert your SuperStinger to an UltraStinger, giving you up to 75,000 candle power. Upgrade your Super Stinger Flashlight to an Ultra Stinger Flashlight. Get up to 40,000 Candlepower – almost 3x’s the power of a Super Stinger. Kit Includes Ultra Stinger Xenon Bulb Ultra Stinger Reflector/Lens Assembly Slightly Used: Mossberg 930SPX Purchased in November of 2011 for a home defense weapon, I set up the gun for the most reliable and efficient I could with the best parts available. Modifications include: VangComp- Stainless Steel follower Nordic Components- Mag tube ext. w/ spring Nordic Components- Barrel clamp w/rail Streamlight- Streamlight Streamlight TLR-1strobe, Remote wire and switch Mesa Tactical- Six shot shell carrier Useage: Total I’ve fired less than 200 shells through the gun, all have been 100% flawless. Rounds fired include 5 00buck and around 150 7 1/2 load winchester and federal low recoil/brass. Finnish The firearm is in perfect condidtion, the only mark is from the nordic barrel clamp rubbing on the top of the barrel (can be seen in photo #4). If you have any questions or want additionl photos just let me know. Ammunition Not Included. keeping wolfdentd

Eotech 1/2/2010 12:12:35 AM OP, you can mount
Eotech 1/2/2010 12:12:35 AM OP, you can mount the 512 directly to the flattop using the supplied mounting screw. This will give you an “absolute cowitness,” meaning the dot on the EOTech will sit directly atop the front sight post when the iron sights are lined up. Using a riser or separate mount will give [...]

Eotech
1/2/2010 12:12:35 AM OP, you can mount the 512 directly to the flattop using the supplied mounting screw. This will give you an “absolute cowitness,” meaning the dot on the EOTech will sit directly atop the front sight post when the iron sights are lined up. Using a riser or separate mount will give you [...]

Golf: Naples’ Kris Tamulis qualifies for U.S. Women’s Open
Golf: Naples’ Kris Tamulis qualifies for U.S. Women’s OpenTamulis believes she’s close to a breakthrough. She’s been working with TV notes: Media quick to defend Na’s slow playI also like the Pinpoint animation of the green contours. It’s still not … Continue reading

Golf: Naples’ Kris Tamulis qualifies for U.S. Women’s Open
Tamulis believes she’s close to a breakthrough. She’s been working with

TV notes: Media quick to defend Na’s slow play
I also like the Pinpoint animation of the green contours. It’s still not as good as Golf Channel’s

Fifth-grader finds gun, follows NRA Eddie Eagle procedure
A very well-informed fifth-grader at Oak Grove Elementary School reportedly followed procedure when he found a loaded gun on the playground at the school Friday. Officials have not released the name of the student, but are planning on presenting a certificate to him Monday, according to Bob Gault, media relations coordinator for the Bradley County Sheriff’s Office. Deputy Jay Lawson, the school’s Resource Officer teaches students throughout the year by using the “Eddie Eagle” safety program. Lawson had taught the students at the school to recognize danger through a “GunSafe” presentation, documented in the Eddie Eagle program which is associated with the National Rifle Association. Just after 10 a.m. Friday, the fifth-grader found a loaded .22-magnum pistol laying near the swing set area on the playground at the school.

California: More semi-auto legislation
The debate over California’s strict gun control laws is about to heat up in Sacramento and it’s all because of what we reported a few weeks ago.

Venezuela: Government makes gun restrictions permanent
Venezuela’s government has prohibited the possession of guns in public places in an effort to counter rampant violent crime.The measure outlaws guns in all public places and specifically mentions city squares, parks, sports facilities and restaurants.President Hugo Chavez’s government in February announced temporary measures outlawing gun possession in public areas as well as halting gun sales and the granting of permits for firearms. The new rules make those changes permanent and also call for metal detectors in restaurants and bars.

Legislative Session Begins in North Carolina
The North Carolina General Assembly will convene its “short session” on Wednesday, May 16.  The NRA and law-abiding gun owners made tremendous advancements last year with the enactment of House Bill 650, the omnibus firearm bill.  However, there is still work to be done.  While new legislation cannot be introduced this year, NRA-backed House Bill 111 made last year’s crossover deadline and is therefore still viable for consideration this session.   

Louisiana: District attorney must prove why it still needs gun seized as evidence, federal court says
Orleans Parish District Attorney Leon Cannizzaro’s office and the city must prove why they still need Errol Houston Jr.’s handgun, three years after he last faced a criminal count, a federal appeals court ruled Tuesday. The ruling by the 5th U.S. Circuit Court of Appeals, scrapping its earlier opinion in the case, could lead to a change in how prosecutors and police view their right to hold on to seized evidence in criminal cases that are dropped but still could be prosecuted later.

Gun And Bow Accessories
Gun And Bow AccessoriesProviding Visitors with Anonymous Access. You can access our Web site home page and browse our site without disclosing your personal data. The services and links of … Airguns Gun And Bow AccessoriesBenjamin Sheridan Discovery Pcp Air/co2 Rfl 177pel 1000 19″ Blue Wood Co2 With 3 Stage Pump Box 1 Single Shot [...]

Gun And Bow Accessories
Gun And Bow AccessoriesWelcome to Gun And Bow Accessories. Bianchi AccuMold Holster w/Adjustable Paddle Design & Closed Muzzle $56.99

Gun And Bow Accessories
Welcome to Gun And Bow Accessories. Bianchi AccuMold Holster w/Adjustable Paddle Design & Closed Muzzle $56.99

Vortex SPARC
5/12/2012 10:01:54 AM

5/12/2012 10:01:54 AM

Scope Rings
Scope Rings 11/8/2011 6:04:46 PM JmanS2k: I was wondering what the lowest Aimpoint Scope Ring mounts are on the market. The only one I really know of is the ADM low quick detach. Are there any on the market that are the low in height but, that aren’t QD? Its a 30mm tube, IIRC. Lapp_Dance [...]

Scope Rings
11/8/2011 6:04:46 PM JmanS2k: I was wondering what the lowest Aimpoint Scope Ring mounts are on the market. The only one I really know of is the ADM low quick detach. Are there any on the market that are the low in height but, that aren’t QD? Its a 30mm tube, IIRC. Lapp_Dance

Vortex Red Dot Scope – MSP AR-15 Accessories, Scope Mounts & Rings
Vortex Red Dot Scope – MSP AR-15 Accessories, Scope Mounts & RingsJoin our mailing list. Enter your e-mail: Whats Hot – AR-15 Accessories – AR-15 Stocks – AR-15 Slings – AR-15 Scopes Training – Sniper CountryOn-Line Sniper Training As a service to its readers and for instructional purposes only, Sniper Country provides on-line adjuncts to [...]

Vortex Red Dot Scope – MSP AR-15 Accessories, Scope Mounts & Rings
Join our mailing list. Enter your e-mail: Whats Hot – AR-15 Accessories – AR-15 Stocks – AR-15 Slings – AR-15 Scopes

Training – Sniper Country
On-Line Sniper Training As a service to its readers and for instructional purposes only, Sniper Country provides on-line adjuncts to sniper/countersniper training.

Gun Accessories
9/15/2011 2:52:43 PM Well…it is a free market after all. Business are free to sell their products for whatever they think the market will bear. I do see your point though and I agree that prices are often inflated. I’ll give you two examples. I bought a YHM Diamond series hand guard in rifle length [...]

9/15/2011 2:52:43 PM Well…it is a free market after all. Business are free to sell their products for whatever they think the market will bear. I do see your point though and I agree that prices are often inflated. I’ll give you two examples. I bought a YHM Diamond series hand guard in rifle length for one of my builds. Before making the purchase I checked around and noticed that YHM was selling it for $180 off their website. They’re the manufacturer so it doesn’t surprise me the cost seemed high. I checked with my local gun store and they were $1.00 less in cost. Then I check Midway……$99.00 SOLD! Cha-ching! That’s an $81.00 savings! Okay, so then I was checking around for a magpul MOE hand guard in carbine length which typically sells for around $20.00 I go to my local gun store and saw it priced for $36.00 Seriously? That’s almost double the price? So I just bought it someplace else. I love our free market, because the consumer is the one who has the power. If I don’t like the price, I just go elsewhere. Mattl [Member] 9/15/2011 2:58:09 PM Originally Posted By EightySecond: They all mark it up to the brink of what they think they can get away with. Supply and price is determined by demand. The AR-15 is the male equivalent of dress up barbie for men and they have to “accessorize”. Any accessory in common use by the USMil and to a lesser degree LE gets insane markup because it becomes a must have accessory. Certain companies have price controls, retailers of their product are not allowed to sell below a certain price or they will lose the chance to restock. If someone is willing to pay it and the supplier is not sitting on un-moving stock it is hard to fault the seller. steve2071 [Member] 9/15/2011 3:18:22 PM Surefire makes these too for 2 bucks less. david_g17 [Member] 9/15/2011 3:19:36 PM Originally Posted By Badlatitude: This thread reminds me how much I hate my customers on a daily basis You work for H&K? david_g17 [Member] 9/15/2011 3:20:23 PM Originally Posted By Badlatitude: A service but its the same BS all the time. ” Well how much do you charge” You tell them and they freak out. Then they beg and plead for a lower price. You wind up doing it for a lower price and they drive you fucking nuts, Don’t listen, interfere, think they know better, make demands and generally just be assholes 24/7. We got a lot of work through the PD and state so I tend to just smile and nod but it drives me NUTS. ETA They aren’t paying for just the work. They are paying for the trucks, equipment, supplies, wages, insurance, phones, advertising and a pile of other things like patent attorneys. fixed. those don’t come cheap. Kilroytheknifesnob [Member] 9/15/2011 3:30:21 PM This argument seems so familiar… Those of you who “know the real cost of manufacturing” please post up actual numbers of how much it costs to make a small, single piece of plastic. Convince us with the facts. I know I can buy non-gun related bits of plastic for a dollar or so, so I think OP has a very valid point. I’m pretty sure gun companies price gouge. hellbound

Red Dot Sights
4/12/2012 8:39:36 PM since its for your wife i would op to go lightweight and get the aimpoint h1 micro dot plus the mount from larue. They are selling a combo deal right now, heres the link http://www.laruetactical.com/aimpoint-micro-h-1-2moam4-mount-combo The_Evil_One

4/12/2012 8:39:36 PM since its for your wife i would op to go lightweight and get the aimpoint h1 micro dot plus the mount from larue. They are selling a combo deal right now, heres the link http://www.laruetactical.com/aimpoint-micro-h-1-2moam4-mount-combo The_Evil_One

SF Soldier Accused in US-to-China Gun Smuggling
SF Soldier Accused in US-to-China Gun Smuggling Defense Review – LaRue Tactical PredatAR Series Lightweight OBR 5 …Mark Fingar of LaRue Tactical was kind enough to take DefenseReview (DR) through the new LaRue Tactical PredatAR Series lightweight OBR 5.56 (5.56x45mm NATO/.223 Rem … Troops Evaluate Latest High-Tech Network Soldiers will deploy to Afghanistan this fall [...]

SF Soldier Accused in US-to-China Gun Smuggling

Defense Review – LaRue Tactical PredatAR Series Lightweight OBR 5 …
Mark Fingar of LaRue Tactical was kind enough to take DefenseReview (DR) through the new LaRue Tactical PredatAR Series lightweight OBR 5.56 (5.56x45mm NATO/.223 Rem …

Troops Evaluate Latest High-Tech Network
Soldiers will deploy to Afghanistan this fall outfitted with the next generation of radios and computers, which service leaders expect to serve as the bedrock for the Army’s next technological leap on the battlefield.

VA to Compete Biological ‘Prosthetics’ Purchases

Defense Review – Russians Getting a New Rifle: New Russian …
Russians Getting a New Rifle: New Russian Military Assault Rifle to Replace Aging Kalashnakov 7.62x39mm AK-47/AKM-type AK74M and 5.45x39mm AK-74-type AK-105 Assault …

Scope Mounts
Scope Mounts 2/14/2012 8:32:53 PM I was hoping for something to replace the existing M93 throw lever on the M952V. Just cuts down on the bulk! HUFFCHAD Stanag Scope Mount ARMS #21 (rifle and scope are not for sale) ILove2Shoot [Industry Partner] 8/27/2008 11:15:12 PM Looks like I have one mount, but would not mind [...]

Scope Mounts
2/14/2012 8:32:53 PM I was hoping for something to replace the existing M93 throw lever on the M952V. Just cuts down on the bulk! HUFFCHAD

Stanag Scope Mount ARMS #21
(rifle and scope are not for sale) ILove2Shoot [Industry Partner] 8/27/2008 11:15:12 PM Looks like I have one mount, but would not mind a throw lever for my other ACOG, and really do need one for stanag scope mount arms #21 scope. ILove2Shoot

City Drops Vietnam Memorial From Parade Route
City Drops Vietnam Memorial From Parade Route A Massachusetts town’s Memorial Day Parade will take a new route this year, beginning downtown and ending at the World War II Memorial, but leaving out the Vietnam War Memorial. Woman To Command British Navy Frigate A 16-year veteran of the Royal Navy has achieved a significant first, …Read the Rest

Wis. Militia Men Brought
Wis. Militia Men Brought Warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, ‘brunelleschi_auto_excerpt_more’ was given in /home/content/75/8591375/html/surefire/wp-includes/plugin.php on line 170 Wis. Militia Men Brought Editor’s Note: This story originally reported that the men had shotguns. That was inaccurate. The men only had shells for a SOTIC Memorandum of Instruction – Sniper [...]

Wis. Militia Men Brought

Warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, ‘brunelleschi_auto_excerpt_more’ was given in /home/content/75/8591375/html/surefire/wp-includes/plugin.php on line 170
Wis. Militia Men Brought Editor’s Note: This story originally reported that the men had shotguns. That was inaccurate. The men only had shells for a SOTIC Memorandum of Instruction – Sniper CountrySpecial Operations Target Interdiction Course – Memorandum of Instruction…

Wis. Militia Men Brought
Editor’s Note: This story originally reported that the men had shotguns. That was inaccurate. The men only had shells for a

SOTIC Memorandum of Instruction – Sniper Country
Special Operations Target Interdiction Course – Memorandum of Instruction MEMORANDUM THRU: Commander, United States Army Special Operations Command,

Streamlight
7/30/2009 8:15:45 PM I prefer the Gladius or the Insight Typhoon (now discontinued). Having said that, I have a Streamlight that I was given and a few G2s around the house. I would not want anything that doesn’t have an LED in it. For sheer cost, I’d buy the regular G2 and then purchase an [...]

7/30/2009 8:15:45 PM I prefer the Gladius or the Insight Typhoon (now discontinued). Having said that, I have a Streamlight that I was given and a few G2s around the house. I would not want anything that doesn’t have an LED in it. For sheer cost, I’d buy the regular G2 and then purchase an LED replacement from Deal Extreme. batmanacw

Gun Accessories
9/15/2011 1:50:43 PM So I can buy magpul mags for $13 but this costs $18? The fuck outta here. Yes, supply/demand. What the market will bear. It’s their product, I don’t have to buy. Blah blah blah. Make the fucking thing in China, you know 99% of us really don’t give a fuck. jrzy

9/15/2011 1:50:43 PM So I can buy magpul mags for $13 but this costs $18? The fuck outta here. Yes, supply/demand. What the market will bear. It’s their product, I don’t have to buy. Blah blah blah. Make the fucking thing in China, you know 99% of us really don’t give a fuck. jrzy

Mesa Tactical
Not only that, but the threads on the Mesa Tactical screws were Stretched out, and deformed! After taking a look at the stock screws that the Benelli rail is attached with, the screws were very squared off (as they’re supposed to be) and the threads were completely in tact. So to do a bit more [...]

Not only that, but the threads on the Mesa Tactical screws were Stretched out, and deformed! After taking a look at the stock screws that the Benelli rail is attached with, the screws were very squared off (as they’re supposed to be) and the threads were completely in tact. So to do a bit more research, i went to my Father, whom is an engineer. After telling him the problems i was having, he took a look at the thread, and (according to him) the threads should NOT look how mine looked. He told me to hold it up to a magnet, and it flew right over to it (was about 1.5 inches away). Accoridng to him, the screw SHOULD NOT be very magnetic at all. The fact that it was magnetic meant that it had a very high carbon/iron content, which made the metal in the screw too soft! This would explain why the screw was deformed. FYI, the stock benelli screws were just barely attracted to the same magnet, which meant they were high-alloy or hardened screws. So, what we have here, is a defective product.

Leave a Reply